Plumbing The Laundry Room In A Right Manner

All the areas of the home that are left exposed to water for a major duration of the day become susceptible to constant leaks and seepages. Instead of acquiring a callous attitude, one may save such areas of the home by adopting a proactive attitude. The laundry room of the home is one such area that should be plumbed and configured properly considering the threats to the concerned plumbing setup.

The washer must be properly supported by drainage system that disposes off the waste water effectively. Generally, the plumbing pipes made up of cast iron or plastic are preferred over the other options available in the market. A width of about 2-3 inches must be maintained while purchasing a drain pipe of a definite length from the local hardware store. A trap may also be installed to remove out the clogs with ease.

The plumbing components of the laundry room must adhere to the plumbing guidelines set by the experts of the trade. For instance, the diameter of the washer segment must be about inches. Similarly, the draw-cocks of diameter inches should be included in the regular scheme of things. Besides that, incorporate a check-valve in the plumbing architecture of your laundry room as well.

Proper arrangements must be made to monitor the temperature of the hot water line and cold water line. While the water in the cold water supply line must not drop below 35 degrees, the temperature range for the hot water must lie in the range of 120-140 degrees Fahrenheit. The thermostat equipments can be installed in the laundry room to keep track of the temperature.

When it comes to the task of maintaining the pressure of the system then certain devices need to be available at your disposal. For example, the washing machine used in the laundry room of the households must operate within a pressure range of 20-120 PSI. To prevent water from getting wasted, a recovery water-tank can be installed. The recovery tank is able to store about 6-8 gallons of water.

Slope the entire floor area towards a central floor-drain unit.

The pitch of the floor would force all water to drain down into the drain segment at the centre of the room.

Take the guidance of a plumber if you face any complication in the concerned job.